| Customization: | Available |
|---|---|
| Type: | Inclinometer |
| Output Signal Type: | Digital Output |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
INC2000 series inclinometer is super high accuracy single or dual axis inclinometer sensor, it uses a sealed
IP67 machined aluminum alloy housing, and it enjoys super high accuracy: up to ±0.001° (room
temperature) and has a wide range of options to cover a measurement range from ±5° to ±30°, and it has
multiple optional output interfaces including RS485, RS232, RS422, voltage output (0-5V or 0-10V), and
current output (4-20mA, 0-20mA, or 0-24mA). The inclinometer adopts big brand components and material,
and the cable are qualified for continuous outdoor use, and it is manufactured and calibrated in our own
factory to guarantee performance and the real accuracy to the stated specification.
Adopting SkyMEMS proprietary algorithms, which reduce the non-linearity, cross errors, quadrantal error
and installation error, the inclinometer has inherently good temperature stability, but this can be improved
further with temperature compensation over a range of different temperatures. And it enjoys high reliability
and survivability in harsh environment and the working temperature is -40~85°C. It has been widely used in
high accuracy medical platform, track gauge instrument, high building monitoring, bridge and dam
monitoring, high accuracy platform, etc.
| Parameter | ||||
| Range | ±5° | ±10° | ±15° | ±30° |
| Measurement axis | X-Y or X | X-Y or X | X-Y or X | X-Y or X |
| Accuracy(Digital Output: RS485, RS422 and RS232) @room temp. | 0.001° | 0.002° | 0.003° | 0.004° |
| Accuracy(Analog Output:Voltage and Current Output) @room temp. | 0.005° | 0.01° | 0.02° | 0.05° |
| Temperature Coefficient | ≤±0.0008°/ºC | |||
| Resolution | 0.001° | room temperature | ||
| Output Interface | Digital Output: RS485, RS422 and RS232 | |||
| Analog Output: Voltage and Current Output | ||||
| Output Data Frequency | 5~100Hz(adjustable) | Adjustable | ||
| Baud Rate | 2400~115200bps | |||
| Voltage | 8-36VDCs | |||
| Current | Digital Output: <15mA@24V; Analog output: 45mA@24V | |||
| Startup Time | ||||
| Electrical and Environment Specs | ||||
| Working Temperature | -40~85ºC | |||
| Storage Temperature | -50~125ºC | |||
| Protection Level | IP67 | |||
| Dimension | 93.8x55.5x26 mm | |||
| Weight | 250 grams | |||
| Connector | 7pin mini aviation connector | |||
| Cable Length | 1 meter |
INC2000 series inclinometer has been widely used in high speed train track gauge leveling
Railway track geometry quality has a decisive influence on the dynamic performance of the vehicle, and railway operating safety and passenger comfort depend to a large extent on the smoothness of the railway track, especially for high-speed railways. Our inclinometer has been widely used in the high speed train track gauge leveling applications.
SkyMEMS is dedicated in the design and manufacture of inclinometer sensors for measuring angles and have developed different series of inclinometers with different output interfaces.
We have many types of inclinometers with competitive price and performance levels suited forhigh speed train track gauge leveling applications.
INC2000 series inclinometer has been widely used in bridge and dam monitoring
Deflection of a bridge span under designed loads is an important parameter for bridge safety evaluation. However, it is inconvenient to obtain the bridge deflections directly. SkyMEMS offers a simple, practical and inexpensive method of measuring static and dynamic deflections of bridge spans under loads, even for bridge spans that traverse great heights. SkyMEMS inclinomters are widely used in bridge and dam monitoring, the inclinometers are installed on the bridge and dam directly, which increases measurement efficiency greatly.
INC2000 series inclinometer has been widely used in dam monitoring
Dams are remarkable civil engineering accomplishments that provide vital resources such as electricity and irrigation. However, these structures are actually constantly moving in very minuscule amounts of tilt. To be certain a dam is aging well, engineers need to effectively use tilt monitoring systems.To be certain that the dam has a healthy lifespan, it's up to engineers to ensure these very tiny movements do not develop into major ones.
To rig a dam with an accurate measurement system, a series of tiltmeters are typically mounted in a vertical section. In this way, deformation can be measured at a number of specific elevations relative to each sensor. The deformation of the dam can be tracked on a regular basis at all hours of the day, in any weather condition.
SkyMEMS inclinometers are widely used in dam monitoring, the inclinometers are installed on the dam directly, which increases measurement efficiency greatly. SkyMEMS INC2000 inclinometers have significant engineering application value and a promising future in measuring dam deformation, and it has been widely used in the dam status monitoring, and now more than thousands of dams are using SkyMEMS inclinometers to monitor their status.
Product Advantages
Why Selecting INC2000 Series 0.001° Accuracy Inclinometer?
INC2000 series 0.001° accuracy inclinometer is designed and produced by SkyMEMS, it enjoys high performance and real 0.001° accuracy, and high reliability. It is a competitive low cost inclinometer sensor in the market, which has the main following advantages:
We are continuously focusing on MEMS measurement & control technologies, and have developed the most advanced and reliable 0.001° accuracy inclinometer INC2000 series. and INC1000M series inclinometer has been widely used in solar tracking system, heavy engineering machinery, high building monitoring, overhead working truck, platform stability, etc. and now more than 1000 customers are using our inclinometer around the world.
Serving customers with heart is the principle of SkyMEMS, Customer demand is the fundamental driving force of our development.
We treat our customers with heart, customers' satisfaction is the direction and target of SkyMEMS. Through continuously technology innovation and service upgrading, we will realize win-win cooperation with customers.
FAQQ: What is the difference between the static inclinometers and dynamic inclinometers?
A: The static inclinometers are equipped with a 2D MEMS accelerometer serving as a sensor cell. This type of inclinometer allows high precision to be achieved in a static system, or when the machine only performs slow movements. And the dynamic inclinometers (also called as vertical gyros) are equipped with a 3D MEMS accelerometer and a 3D MEMS gyroscope. An intelligent algorithm combines the signals from the accelerometer and the gyroscope to eliminate the effect of accelerations (e.g. due to rapid movement of equipment), vibrations and shocks. And INC1000M inclinometer belong to static inclinometer, which can provide high accuracy tilt angle in a static system or slow movement applications.
Q: How to calibrate the inclinometer?
A: The inclinometer needs to be calibrated on a high-precision turntable, and then the obtained data is used to perform algorithmic compensation on the inclination sensor. At the customer side, if there is no precision turntable, it cannot be calibrated, we can provide inclinometer calibration service.
Q: How to protect the INC2000 inclinometer components from failure?
A: The high-precision INC2000 inclinometer is mainly used for measurement in a static environment or similar static environment. It adopts IP67 protection, and the device will not fail in normal use.
Q: What are the applications of inclinometer?
A: Inclinometers are used for: - Determining latitude using Polaris (in the Northern Hemisphere) or the two stars of the constellation Crux (in the Southern Hemisphere). - Determining the angle of the Earth's magnetic field with respect to the horizontal plane. - Showing a deviation from the true vertical or horizontal. - Surveying, to measure an angle of inclination or elevation. - Alerting an equipment operator that it may tip over. - Measuring angles of elevation, slope, or incline, e.g. of an embankment. - Measuring slight differences in slopes, particularly for geophysics. Such inclinometers are, for instance, used for monitoring volcanoes, or for measuring the depth and rate of landslide movement. - Measuring movements in walls or the ground in civil engineering projects. - Determining the dip of beds or strata, or the slope of an embankment or cutting; a kind of plumb level. - Some automotive safety systems. - Indicating pitch and roll of vehicles, nautical craft, and aircraft. See turn coordinator and slip indicator. - Monitoring the boom angle of cranes and material handlers. - Measuring the "look angle" of a satellite antenna towards a satellite. - Adjusting a solar panel to the optimal angle to maximize its output. - Measuring the slope angle of a tape or chain during distance measurement.
Q: What is Two-axis digital inclinometer?
A: Traditional spirit levels and pendulum-based electronic leveling instruments are usually constrained by only single-axis and narrow tilt measurement range. However, most precision leveling, angle measurement, alignment and surface flatness profiling tasks essentially involve a two-dimensional surface plane angle rather than two independent orthogonal single-axis objects. Two-axis inclinometers that are built with MEMS tilt sensors provides simultaneous two-dimensional angle readings of a surface plane tangent to earth datum. Typical advantages of using two-axis inclinometers over conventional single-axis "bubble" or mechanical leveling instruments may include: - Two-axis MEMS technology enables simultaneous two-dimensional (X-Y plane) tilt angles (i.e. pitch & roll) measurement, eliminates tedious trial-and-error (i.e. going back-and-forth) experienced when using single-axis levels to adjust machine footings to attain a precise leveling position. - Two-axis MEMS inclinometers can be digitally compensated and precisely calibrated for non-linearity for operating temperature variation resulting in higher angular accuracy over wider angular measurement range. - Two-axis MEMS inclinometer with built-in accelerometer sensors may generate numerical data tabulated in the form of vibration profiles enable machine installer to track and assess alignment quality in real-time and verify structure positional stability by comparing machine's leveling profiles before and after setting up.
Q: What is the Limitations of Static Inclinometers?
A: In case of strong shock and vibration, the physical damping in static inclinometers might not be sufficient to suppress disturbances. Software filters can only help to a limited extent in reducing the impact of such disturbances. For static inclinometers, "moving average" or "exponential" filters can be activated and configured to smoothen the signal, but with the downside that the fast reaction time of the MEMS inclinometer is lost and the response of sensor becomes slower. For dynamic movements with strong accelerations, SkyMEMS's Dynamic inclinometers should be used. They are based on a different technology without physical damping so that there is no tradeoff between stability and response time.
Q: What is slope inclinometer?
A: A slope inclinometer (SI) is a device for monitoring subsurface movement. Slope inclinometers are often used to monitor the performance of slopes and embankments. They can provide early warning of developing instabilities; allow the assessment of pattern, depth and rate of movement; and help engineers make better and more timingly decisions on possible remedial actions to such sloping movements. Other applications include monitoring the impact of excavations on surrounding facilities, deformation of structures, and settlement of embankment fills and roadway subgrades.
Q: whether the connector and cable length can be selected?
A: yes, no problem, please let us know the connector type and cable length you want, then we can do it.
Q: How about the delivery time?
A: for our standard model, if we have them in stock, only need 2~3days to re-test before shipping, if it is out of stock, then need around 2 weeks to arrange the production and tests. For the ODM electronic product, if needing to modify the structure, it will need around 3~4 weeks to arrange the production and tests.
Q: How to arrange the payment?
A: about the payment, please pay to our company account, the beneficiary's name: NANJING SKY MEMS TECHNOLOGY CO., LTD. And our email is only @skymems to contact with u formally. To notice this to avoid the loss.
){kind=link}