| Customization: | Available |
|---|---|
| Type: | Inertial Measurement Unit |
| Output Signal Type: | Digital Output |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
IMU488M Inertial Measurement Unit is a high performance tactical grade MEMS Inertial Measurement Unit, which MEMS gyroscope enjoys 1°/h (Allan) bias instability and MEMS accelerometer enjoys 30µg (Allan) bias instability, and it can output precise 3 axis outputs of angular rate, 3 axis acceleration data, 3 axis magnetometer data, and barometer data, etc.
IMU488M Inertial Measurement Unit adopts latest MEMS technology and advanced MEMS components, and IMU488M has been produced in bulk, which reduces the cost deeply. IMU488M enjoys excellent measurement performance, small size, light weight, and high reliability and robustness, it can output precise measurement data in harsh environment, and it has been widely applied in tactical unmanned aerial vehicles, surface vehicle, platform stabilization, industrial robotics, etc.
Technical Specifications| Parameter | Test Condition | Min | Typical | Max | Unit |
| Gyroscopes | |||||
| Range1 | ±450 | °/s | |||
| Bias Instability | Allan variance | 1 | °/h | ||
| 10s average (-40~+85°C, fixed temp.) | 2 | 3 | 4 | °/h | |
| Bias Repeatability | 2 | °/h | |||
| Radom Walk | 0.1 | º/√h | |||
| Bais | Bias change at full temp. range2 | ±0.04 | °/s | ||
| Bias change in vibration conditions3 | 6 | °/h | |||
| Scale Factor Nonlinearity | 100 | ppm | |||
| Bandwidth | 200 | Hz | |||
| Accelerometers | |||||
| Range1 | ±16 | g | |||
| Bias Instability | Allan variance | 30 | 45 | ug | |
| 10s average (-40~+85°C, fixed temp.) | 60 | ug | |||
| Bias Repeatability | 60 | ug | |||
| Random Walk | 0.01 | m/s/√h | |||
| Non-linearity | 100 | ppm | |||
| Bandwidth | 200 | Hz | |||
| Magnetometer | |||||
| Range | ±2 | Gauss | |||
| Resolution | 120 | uGauss | |||
| Noise RMS | 10Hz | 50 | uGauss | ||
| Bandwidth | 200 | Hz | |||
| Barometer | |||||
| Pressure Range | 450 | 1100 | mbar | ||
| Resolution | 0.1 | mbar | |||
| Absolute Accuracy | 1.5 | mbar | |||
| Interface | |||||
| UART4 | |||||
| Baud Rate | 230400 | bps | |||
| Output Rate | 200 | Hz | |||
| SPI | |||||
| Serial Clock Frequency | 25 | MHz | |||
| Output Rate | 2000 | Hz | |||
| Reliability | |||||
| MTBF | 20000h | ||||
| Continuous Working Time | 120h | ||||
| Electronic Features | |||||
| Supply Voltage | 3.3 V | ||||
| Power Consumption | 0.15 W | ||||
| Ripple Wave | 100mV (P-P) | ||||
| Environment Conditions | |||||
| Operating Temperature | -40°C ~ 85°C | ||||
| Storage Temperature | -55°C ~ 105°C | ||||
| Vibration Resistance | 20~2000Hz, 6.06g | ||||
| Shock Resistance | 1000g, 0.5ms | ||||
| Physical Characteristics | |||||
| Size | 47 × 47 × 14 mm | ||||
| Weight | 50grams | ||||
| Connector | 2 x 12pins | ||||
| Note: 1: The range of Gyroscopes and Accelerometers can be configured in our factory. 2: The bias value is calculated based on the whole temperature change period, the temperature changing rate<=2°C/minute, temperature range:-40~+85°C; 3: (before vibration average value +after vibration average value) /2-during vibration average value, the vibration conditions are 6.06g, 20~2000Hz 4: The baud rate and output rate can be configured in our factory. |
|||||
IMU488M Inertial Measurement Unit widely used in unmanned aircraft
Inertial Measurement Unit (also name as IMU), is an electronic device that measures and reports acceleration, orientation, angular rates, and other gravitational forces. It is composed of 3 accelerometers, 3 gyroscopes, and other sensors also can be optional.
UAV is unmanned aerial vehicle, commonly known as a drone, is an aircraft without a human pilot aboard. The flight of UAVs may operate with various degrees of autonomy: either under remote control by a human operator or autonomously by onboard computers.
IMU488M UAV IMU is a tactical-grade MEMS-based IMU (inertial measurement unit), it is ideal for a range of critical UAV applications, including flight control, antenna stabilization, and navigation, and is also an essential component for inertial navigation systems (INS).
IMU488M UAV IMU provides reliable performance with good accuracy in dynamic environment, it has been widely used in unmanned aircraft by the Chinese leading companies, now more than tens of thousands IMU488M IMU modules are used in the unamend aircraft.
IMU488M Inertial Measurement Unit widely used in Autonomous Vehicles
The typical IMU for autonomous vehicles use includes a three-axis accelerometer and three-axis rate sensor. The inertial measurement unit (IMU) is a device that directly measures a vehicle's three linear acceleration components and three rotational rate components (and thus its six degrees of freedom). An IMU is unique among the sensors typically found in an unmanned vehicle because an IMU needs no connection to or knowledge of the external world. This environment independence makes the IMU a core technology for both safety and sensor-fusion.
An accurate IMU can also determine and track attitude precisely. When driving, the direction or heading of the unmanned vehicle is as crucial as its position. Driving in a slightly wrong direction even briefly may put the unmanned vehicle in the wrong lane. Dynamic control of the unmanned vehicle requires sensors with dynamic response. An IMU does a nice job of tracking dynamic attitude and position changes accurately. Its fully environment-independent nature lets an IMU track position even in tricky scenarios such as slipping and skidding where tires lose traction.
IMU488M IMU modules provide reliable performance with good accuracy in dynamic environment, it has been widely used in autonomous vehicles by the Chinese leading companies, now more than hundreds of thousands IMU688M IMU modules are used in the autonomous vehicles.
Product Advantages
Why Selecting IMU488M Inertial Measurement Unit
IMU488M Inertial Measurement Unit is designed and produced by SkyMEMS, it enjoys high performance and accuracy, and high reliability with competitive price, which can be compatible with ADIS16488 interface and protocol. It is a tactical inertial measurement unit sensor, which has the main following advantages:
We are continuously focusing on MEMS measurement & control technologies, and have developed the most advanced inertial measurement unit IMU688M. and IMU488M has been widely used in tactical UAS Navigation & Control, Seeker, Platform Stabilization, etc. and now more than 200 customers are using our tactical IMU around the world.
5. World-class Production Line, Fast Delivery
Serving customers with heart is the principle of SkyMEMS, Customer demand is the fundamental driving force of our development.
We treat our customers with heart, customers' satisfaction is the direction and target of SkyMEMS. Through continuously technology innovation and service upgrading, we will realize win-win cooperation with customers.
){kind=link}